QA1 Bolt-On Subframe Connector Kit - Black - GM F-Body 1970-74
Product Overview The 2nd Gen F-body was designed in an era when high-performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-in sub-frame connectors offer a simple and effective solution to this common issue. Reduced Chassis Flex QA1's sub-frame connectors tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance, especially during cornering, acceleration, and braking. The tubular design connects the front Camaro subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Includes Solid Body Mounts and Hardware The included solid body mounts further reduce chassis flex. Their aluminum construction offers a noise free alternative to polyurethane. Thoughtful Design The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. Easy Bolt-in Installation Bolt-in installation makes the upgrade hassle-free. Made in the USA QA1 suspension is proudly made in Lakeville, Minnesota.
Product Description:
QA1 Precision Products invites you to upgrade your suspension with the top names in racing: QA1 Shocks and Carrera Shocks. QA1 was founded in 1993 and quickly became the #1 name in rod ends and spherical bearings sold into performance racing. In 2004, QA1 purchased Carrera Shocks and is now the #1 manufacturer of performance racing shocks. QA1 Shocks now offer QA1 double adjustable shocks, QA1 monotube shocks, QA1 gas pressurized shocks and QA1 chrome plated shocks and springs. QA1 Shock Absorbers utilize many unique processes and components in its shock absorbers, with a tremendous selection available. QA1 offers a complete line of QA1 racer revalveable shocks, QA1 rebuildable and repairable circle track shocks, QA1 racing shock absorbers and QA1 stock mount shocks. We carry QA1 Racing Shocks, QA1 Coil-Over Shocks, QA1 50 Series Steel Replaceable Bearing Shocks, QA1 60 Series Aluminum Smooth Body Shocks, QA1 62 Series Aluminum Threaded Body Shocks, QA1 82 Series Aluminum Threaded Small Body Shocks, QA1 64 Series Aluminum Double Adjustable Threaded Body Shocks and QA1 Stock Mount Street Stock Shocks. QA1 Springs are manufactured with the highest quality chrome silicone wire available, are double heat-treated, double shot-peened powder coated or chrome plated. Each spring has been designed to be as light as possible without sacrificing performance. QA1 Rod Ends are the #1 name in rod ends and QA1 has the largest selection in the industry. We offer QA1 Steel Rod Ends and QA1 Aluminum Rod Ends. Be sure to check out our QA1 aXMa Series Chrome Moly Steel Rod Ends, QA1 aAMa Series Aluminum Rod Ends, QA1 aCMa Series Carbon Steel Rod Ends and QA1 aPCMa Series Chrome Moly Steel Rod Ends. QA1 Rod Ends are engineered for unbeatable performance, nothing is better! Every QA1 product has been engineered to outperform the competition at an affordable price. Get in the driveras seat and take control of your suspen
Product Overview The 2nd Gen F-body was designed in an era when high-performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-in sub-frame connectors offer a simple and effective solution to this common issue. Reduced Chassis Flex QA1's sub-frame connectors tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance, especially during cornering, acceleration, and braking. The tubular design connects the front Camaro subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Includes Solid Body Mounts and Hardware The included solid body mounts further reduce chassis flex. Their aluminum construction offers a noise free alternative to polyurethane. Thoughtful Design The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. Easy Bolt-in Installation Bolt-in installation makes the upgrade hassle-free. Made in the USA QA1 suspension is proudly made in Lakeville, Minnesota.
Product Description:
QA1 Precision Products invites you to upgrade your suspension with the top names in racing: QA1 Shocks and Carrera Shocks. QA1 was founded in 1993 and quickly became the #1 name in rod ends and spherical bearings sold into performance racing. In 2004, QA1 purchased Carrera Shocks and is now the #1 manufacturer of performance racing shocks. QA1 Shocks now offer QA1 double adjustable shocks, QA1 monotube shocks, QA1 gas pressurized shocks and QA1 chrome plated shocks and springs. QA1 Shock Absorbers utilize many unique processes and components in its shock absorbers, with a tremendous selection available. QA1 offers a complete line of QA1 racer revalveable shocks, QA1 rebuildable and repairable circle track shocks, QA1 racing shock absorbers and QA1 stock mount shocks. We carry QA1 Racing Shocks, QA1 Coil-Over Shocks, QA1 50 Series Steel Replaceable Bearing Shocks, QA1 60 Series Aluminum Smooth Body Shocks, QA1 62 Series Aluminum Threaded Body Shocks, QA1 82 Series Aluminum Threaded Small Body Shocks, QA1 64 Series Aluminum Double Adjustable Threaded Body Shocks and QA1 Stock Mount Street Stock Shocks. QA1 Springs are manufactured with the highest quality chrome silicone wire available, are double heat-treated, double shot-peened powder coated or chrome plated. Each spring has been designed to be as light as possible without sacrificing performance. QA1 Rod Ends are the #1 name in rod ends and QA1 has the largest selection in the industry. We offer QA1 Steel Rod Ends and QA1 Aluminum Rod Ends. Be sure to check out our QA1 aXMa Series Chrome Moly Steel Rod Ends, QA1 aAMa Series Aluminum Rod Ends, QA1 aCMa Series Carbon Steel Rod Ends and QA1 aPCMa Series Chrome Moly Steel Rod Ends. QA1 Rod Ends are engineered for unbeatable performance, nothing is better! Every QA1 product has been engineered to outperform the competition at an affordable price. Get in the driveras seat and take control of your suspen
Original: $589.95
-70%$589.95
$176.99Description
Product Overview The 2nd Gen F-body was designed in an era when high-performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-in sub-frame connectors offer a simple and effective solution to this common issue. Reduced Chassis Flex QA1's sub-frame connectors tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance, especially during cornering, acceleration, and braking. The tubular design connects the front Camaro subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Includes Solid Body Mounts and Hardware The included solid body mounts further reduce chassis flex. Their aluminum construction offers a noise free alternative to polyurethane. Thoughtful Design The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. Easy Bolt-in Installation Bolt-in installation makes the upgrade hassle-free. Made in the USA QA1 suspension is proudly made in Lakeville, Minnesota.
Product Description:
QA1 Precision Products invites you to upgrade your suspension with the top names in racing: QA1 Shocks and Carrera Shocks. QA1 was founded in 1993 and quickly became the #1 name in rod ends and spherical bearings sold into performance racing. In 2004, QA1 purchased Carrera Shocks and is now the #1 manufacturer of performance racing shocks. QA1 Shocks now offer QA1 double adjustable shocks, QA1 monotube shocks, QA1 gas pressurized shocks and QA1 chrome plated shocks and springs. QA1 Shock Absorbers utilize many unique processes and components in its shock absorbers, with a tremendous selection available. QA1 offers a complete line of QA1 racer revalveable shocks, QA1 rebuildable and repairable circle track shocks, QA1 racing shock absorbers and QA1 stock mount shocks. We carry QA1 Racing Shocks, QA1 Coil-Over Shocks, QA1 50 Series Steel Replaceable Bearing Shocks, QA1 60 Series Aluminum Smooth Body Shocks, QA1 62 Series Aluminum Threaded Body Shocks, QA1 82 Series Aluminum Threaded Small Body Shocks, QA1 64 Series Aluminum Double Adjustable Threaded Body Shocks and QA1 Stock Mount Street Stock Shocks. QA1 Springs are manufactured with the highest quality chrome silicone wire available, are double heat-treated, double shot-peened powder coated or chrome plated. Each spring has been designed to be as light as possible without sacrificing performance. QA1 Rod Ends are the #1 name in rod ends and QA1 has the largest selection in the industry. We offer QA1 Steel Rod Ends and QA1 Aluminum Rod Ends. Be sure to check out our QA1 aXMa Series Chrome Moly Steel Rod Ends, QA1 aAMa Series Aluminum Rod Ends, QA1 aCMa Series Carbon Steel Rod Ends and QA1 aPCMa Series Chrome Moly Steel Rod Ends. QA1 Rod Ends are engineered for unbeatable performance, nothing is better! Every QA1 product has been engineered to outperform the competition at an affordable price. Get in the driveras seat and take control of your suspen
